Type | VTH25 | VTM25 | ||
---|---|---|---|---|
Material pipe section | Brass | Plastic PP | Brass | Stainless steel |
Flow range | 4...160 l/min* | |||
Accuracy | ±5 % of of reading (up to 5 l/min 7 % of of reading) | |||
Repeatability | ±0.5 % | |||
Signal output | < 1 l/min | |||
Medium temperature | 0...85 °C** | 0...80 °C** / 2 bar 0...60 °C** °C / 5 bar 0...30 °C** °C / 10 bar |
0...85 °C** | |
Pressure rating | PN 10 | PN 50 | ||
Nominal diameter | DN 25 | |||
Process connection | G 1¼ male thread, supplementary screwed connection required, see accessories | |||
Sensor | Hall effect sensor | Hall effect sensor | ||
Output signal » Pulse rate / K-factor » Resolution » Signal shape » Signal current |
65 pulses/l 15 ml/pulse Square wave signal NPN open collector Max. 19 mA |
65 pulses/l 15 ml/pulse Square wave signal NPN open collector Max. 19 mA |
||
Electrical connection | 2 m PVC cable, shielded (Tmax = 75 °C) | 4 pin plug connector M12 x 1 | ||
Power supply | 10...30 VDC optional 4.5. 26.5 VDC |
6.5...24 VDC short circuit proof and reverse polarity protected |
||
Degree of protection EN 60529 | IP54 | |||
Max. particle size in the medium | < 0.63 mm |
Materials in contact with fluid | ||||
---|---|---|---|---|
VTH25 brass | VTH25 plastic PP | VTM25 brass | VTM25 stainless steel | |
Pipe section | Brass CW724R | PP | Brass CW724R | Stainless steel 1.4571 |
Turbine cage | PS-ST Xarec® 20 % glass fibre reinforced | |||
Rotor | PS-ST Xarec® 20 % glass fibre reinforced | |||
Shaft | Stainless steel 1.4539 | |||
Bearings | Sapphire / PA | |||
Housing for Hall effect sensor |
PS-ST Xarec® 20 % glass fibre reinforced | Brass CW602N / CW614N | Stainless steel 1.4571 | |
O-ring | EPDM | |||
Screen filter (option) Associated O-ring |
Stainless steel 1.4301 EPDM | Stainless steel 1.4301 EPDM | ||
Spacer | PP |